How to Clean a Bottom Load Water Cooler?
If you have a bottom-load water cooler, it is important to clean it periodically. This can help you to avoid bacterial growth and maintain the quality of your drinking water. The good news is that this can be a quick and easy task. All you need is a cleaning solution, a sponge, and some time.
(Looking for water conditioning? Contact us today!)
First, unplug the cooler from the electrical source. Also, drain the reservoir. Once this is done, you can reassemble the machine. However, you should read the manufacturer’s instructions for specific steps, as each model is different.
Next, fill your cooler with plain water. You can use a jug or a bucket. Make sure to leave at least a few inches of space between the top of the container and the floor. That way, you’ll be able to make sure the cooler has enough room to breathe.
To get the best results, you should also read the manufacturer’s manual for the exact steps. Aside from ensuring you’re using the proper cleaning solution, you may want to replace the filters in your water cooler every six months to ensure the highest quality water.
After that, you’ll want to wipe down the exterior of your water cooler. This can include a simple wipe down with anti-bacterial wipes. It’s a good idea to remove any dust from the surfaces of your cooler, especially the vents. Another step to take is to clean the air filter.
For the best results, you’ll want to mix a solution of distilled white vinegar and water in a ratio of about one to three. You can then add the solution to the reservoir and let it soak for a few minutes.
Once that’s completed, you’ll want to rinse the vinegar solution off. While you’re doing so, you should also clean the bottle neck of your water bottle. Be careful to not spill any of the solution on your clothes or the air filter.
The same can be said for the spouts. Since these are high-touch surfaces, it’s a good idea to rinse them well.
Finally, you should clean the water dispenser. Most manufacturers recommend cleaning the device at least twice a year. This can also help to maintain the taste of your drinking water.
Finally, you should also wash the inside of your water cooler. While there’s not as much to do here, it’s still a good idea to clean it with a long-handled brush. This will remove any buildup of microbes and other debris that can accumulate over time.
Lastly, don’t forget to drain the excess water. You should do this twice – once before you start to rinse, and another once you’ve finished. Use the same cleaning solution you used to sanitize your water cooler.
Using a combination of plain water, a sanitizing solution, and a microfiber cloth will get your bottom load water cooler sparkling clean. It’s not hard to keep it in tip-top shape, and it will be well worth the effort.