How to Install a Corsair Water Cooler?
The Corsair Hydro Series H100i is a very impressive water cooler that comes with a few nice features. First and foremost, the pump on this model has a tachometer, which means you can measure your system’s temperature in real time. There’s also a cool new RGB lighting feature that creates dazzling effects. This cooler also ships with a 5-year warranty, so if anything should go wrong, you can rest assured that the company will stand by their product.
(Searching in Google “Replaceable Filters Expert“? Contact us today!)
As you might expect, the H100i features a pump that is optimized for quiet operation. It also ships with a backlit multi-zone pump that will allow you to choose between two, three, or four zones, depending on your preference. The copper cold plate that surrounds the pump provides a good level of cooling for a solid and quiet system. Using the built-in RGB lighting effects, you can also control individual LEDs in each zone, making for a very impressive cooling effect.
Installing the H100i is fairly straightforward, thanks to a few helpful components. First, the pump head should be routed to the rear of the system. The other major component is the radiator, which should be mounted in the chassis. You can either use one or two screws to secure the radiator to the case. Once the pump and radiator are in place, it’s time to install the fans. These fans are rated to run at 24RPM and can be found in several different sizes. They come with a 4PWM connector, which is a good fit for the pump.
Next, you need to connect the included USB cable to the motherboard. This is actually a nice touch, as it’s a right-angled micro-USB connector, and it goes all the way to the bottom of your motherboard.
The CORSAIR logo is printed on the front and top of the box. This is not a particularly large sticker, but it is visible from the front. In the center of the box is a smaller sticker that tells you exactly what the cooler is and how to use it. To complete the installation, it’s important to mount the bundled USB cable into a 9-pin USB 2.0 header on your motherboard.
Finally, you’ll need to install the iCUE software. This is a must, as it lets you control the lighting effects on the cooler. Using the software, you’ll have the option to set alerts, which will send you an email or text message when a certain LED turns on or off. Of course, you can also change the brightness of the LEDs yourself.
In the end, the H100i is not only an impressive cooler, but a very easy one to install as well. Thanks to the iCUE software and a few handy tricks, you’ll have a beautiful CPU cooling solution in no time. So, if you’re looking to get the best cooling performance for your money, you can’t go wrong with the Corsair Hydro Series H100i. Aside from its RGB functionality, this cooler boasts a multi-zone backlit pump, which will provide excellent airflow for your system.