How to Fix Water Cooler Leaking?
If you’re looking for a convenient and reliable way to keep yourself hydrated, a water cooler is an ideal solution. But if it leaks, that can be a huge inconvenience. Luckily, there are a few things you can do to help fix your water cooler leaking problem.
(Looking for a UV water filtration system? Contact us today!)
First, you’ll want to identify the source of the leak. You can do this by performing a thorough inspection of the unit to find out what is wrong with it.
* The bottle – The most common culprit of a water cooler leak is the bottle itself. This usually occurs when the bottle develops a tiny crack, which allows air to enter the bottle and causes water to leak out.
Often, this is caused by the bottle being transported for long periods of time or by being knocked around too much. It’s a common problem that can be resolved by simply replacing the bottle with a new one.
Another common leak is coming from the spout or spigot of the water cooler itself. This can be a sign of a loose spout or a bad spigot tab that is causing water to drip out when you turn the water spout on or off. To fix this, remove the spout and spigot from the water cooler and replace them with a new one. Once you’ve done this, make sure the spout and spigot are secured well by turning them clockwise until they are tight.
If the spout or spigot has a small chip in it, it can be fixed with plastic epoxy. You’ll need to sand the area with 120-grit sandpaper before you apply the epoxy so that it has a better chance of bonding to the material.
Once you’ve repaired the spout or spigot, make sure that it’s secure before you use the cooler again. You can use a screwdriver to tighten the spout or spigot, but be careful not to break it.
In addition, you should ensure that the spout and spigot remain clean of debris. This will prevent future dripping or leaks from occurring.
A clogged reservoir is another possible reason for a leaking water cooler. This is commonly caused by people shoving paper towels or other items into the reservoir. Once the reservoir is clogged, it can cause the water to back up and spill over onto the floor.
When this happens, the floor can become wet and the entire room can become flooded. To avoid this happening, it’s important to regularly empty the reservoir into a bucket and call an engineer to do so.
The water supply company that supplies your jugs of water might be able to fix or replace the container for you, if necessary. This can be an affordable option and a time-saving convenience, especially when you have a large number of jugs on your account.
If you’re experiencing a leak, don’t panic. There are several things you can do to fix the issue quickly and easily. Once you’ve followed these steps, you should be able to fix your leaking water cooler in no time at all!