How to Install a Home Water Filtration System?

A whole-house water filtration system is a great way to prevent costly damage to your pipes. Fortunately, installing a whole house filtration system isn’t as complicated as it sounds. To get the best results, read your manufacturer’s instructions before beginning, and consult with a professional plumber or contractor if you have any questions. 

(Looking for water testing companies? Contact us today!)

The first step is to test the water. Ideally, this is done before installing the system and after installation. Tests will help you determine the types of contaminants in your water, and the effectiveness of different filtration methods. While testing, it’s also a good idea to find out if your water comes from a municipal or private well. If your well is privately owned, you’ll have to make sure you have a supply of filter media to change regularly. 

After testing the water, you can start the actual filtration process. Typically, a whole house water filtration system will include a sediment prefilter. It’s a good idea to mount this part with mounting brackets. 

You’ll also need to connect a one-inch pipe to the filtering system. Using Teflon tape to seal the threaded ends can help prevent damage from water. Another good way to prevent leaks is to use a U-bracket to secure the system to the wall. This will ensure that your filtration system stays plumbed straight. 

Adding a filtration system to your home can be a rewarding and enjoyable experience. However, it’s important to keep in mind that a well-functioning system should be easy to maintain and operate. In addition to being able to replace the filter media, you’ll also need to have access to a pressure gauge and a bypass valve. When the system is in service mode, you can drain the main line. 

Luckily, a lot of plumbing companies will offer their services, so there’s no need to feel intimidated by this project. Professionals charge anywhere from $45 to $200 for an hour’s worth of work. 

As with any large, complex project, you’ll want to be sure you’re using the right tools for the job. If you’re a novice, it’s a good idea to take a trip to your local hardware store to buy extra parts. There are a number of nifty devices on the market, including a pressure gauge and a bypass valve. Although a few of them are a bit of a gimmick, they can be quite helpful. 

Depending on the model you choose, you may have to make some modifications to your existing plumbing configuration. If you’re installing a reverse osmosis or carbon filtration system, for example, you’ll need to have room beneath the sink to fit the spigot. Luckily, many sinks come with a knockout hole for this purpose. 

One last item you might want to consider is the size of your filter. If you live in a particularly small apartment, you may want to choose a smaller model than you think you need. On the other hand, if you live in a larger home, it might be a good idea to consider a large system.