How to Clean a Water Cooler?
Cleaning your water cooler is an important part of maintaining it. Dirty water coolers can cause mold, mildew, and even germs to build up. Fortunately, you can easily keep your cooler looking great by following a few easy steps.
(Looking for water company Missoula? Contact us today!)
First, you need to unplug the cooler. You can do this by either disconnecting the water bottle or the electrical outlet. Then, you will need to drain the water. You can do this by either flushing the cooler or putting it in a sink filled with clean water. After you have done this, you will need to replace the water bottle in the cooler.
If you are not sure how to do this, you can refer to the user’s manual for more details. Alternatively, you can contact the manufacturer for further assistance. You can also find out more information online.
You will need a cleaning solution, such as a scent-free household bleach. Make a solution of one gallon of water and a teaspoon of unscented bleach. Rinse the mixture thoroughly. You can use a clean lint-free towel to apply the sanitizing solution. You can also use a disposable duster.
Once the cleaning solution has been applied, you should wait for five minutes. You should then scrub the surface of the cooler with a long-handled brush. Afterward, you should wipe the interior of the reservoir with a lint-free towel. Finally, you should flush the cleaning solution through the toilet.
If you are using a bottom-loading dispenser, it will be easier to clean. To do so, you will need to remove the water bottle from the dispenser. This will allow you to remove the parts. You can also wash the sides of the cooler with hot soapy water. You can clean the baffle, spigot paddles, and the water guard with the same methods as you used to clean the reservoir.
If you are using a top-loading dispenser, you can follow the same steps but you will need to use a spray. You can also use a cloth to rinse and scrub the water cooler. You can also rinse the spigots with water.
You can also use vinegar to clean your water cooler. It is a natural disinfectant. It also helps to kill mildew and mold. You can also use a diluted solution of distilled white vinegar and water. This is more effective than using bleach. If you are worried about the smell of vinegar, you can add a small amount of lemon juice to your mix.
If you are having problems cleaning your water cooler, you can call the manufacturer for assistance. They will be able to recommend a good cleaning solution. You can also contact the Alberta Health Services Environmental Public Health if you have questions about your cooler.
When cleaning your water cooler, it is important to keep in mind that you should not mix chlorine and vinegar. Both chemicals can react and cause damage. Instead, you should choose a cleaner that is gentle on your cooler.