How to Change a Water Cooler Filter? 

When it comes to a water cooler, you will want to make sure that you keep it running properly, and the best way to do this is to change the filter frequently. Not only will it help keep your water cool and fresh, but it will also help you avoid any spills that may happen. 

(Searching in Google “Missoula Water Expert“? Contact us today!)

Changing the water filter is not an impossible task, but it does require some extra care. In order to do this correctly, you will want to follow a few easy steps. You will need to take your old water bottle out of the dispenser, and then you will want to use the appropriate cleaning solution to clean the container. Once the liquid is rinsed, you will need to flush the solution down the toilet. If your system is connected to a mains source, you will need to have the filter replaced every six months. 

Before you start, you will want to prepare your container by washing your hands. After you have finished washing, you will need to find a soft cloth that is absorbent. Place the cloth near the cooler. Then, you will need to remove the cap from the neck of the bottle. This will enable you to place the new bottle on top of the dispenser. 

You will need to have one hand on the water bottle, and you will need the other hand to hold the cooler. To do this, you will need to tilt the bottle to a 45-degree angle. Keep your back straight, and lift the bottle in a safe and secure manner. 

Getting rid of a used water bottle can be difficult, and you will likely have to do it more than once. It is important to make sure that you do this correctly, as a cracked bottle can injure you. Also, you will need to have a clean, absorbent towel near you to wipe down the rim of the cooler. 

While a 5-gallon water bottle weighs around 40 pounds, you can get it from the cooler easily if you have assistance. Just make sure to lift it with your dominant hand. You will need to hold the cooler at a 45-degree angle, and you will want to have the other hand holding the water bottle. 

Aside from changing the filter, you will also need to sanitize the tank before you install it. Sanitizing your tank will help clear it of any bacteria, sand, and debris that may have collected on the surface of the water. Depending on the model of your cooler, this will take between two and five minutes. 

One of the most important tips for sanitizing your water bottle is to always use soapy water. You can purchase a sani kit at a local store, and the sanitizing process will not require much of your time. 

If you are not comfortable with the process, you can watch a video that teaches you how to sanitize your water cooler. This will ensure that you can replace your old bottle without a lot of hassle.