How Do You Clean a Water Cooler? 

Keeping a water cooler clean is important because it can get dirty very quickly. Dirty coolers can be a source of bacteria, mold, and viruses. They can also re-contaminate treated water. It is also not advisable to use a water cooler that is dirty because it is not safe to drink. 

(Searching in Google “water conditioning near me“? Contact us today!)

When it comes to cleaning a water cooler, it is best to make sure that you are following the manufacturer’s instructions. Some coolers can be easily cleaned with a microfiber cloth and multipurpose spray. However, some parts of the cooler may need to be dismantled, which can cause damage. The parts of the cooler that should be removed include the water bottle, the drain tray, the baffle, and the spigots. These components need to be thoroughly cleaned before being reattached to the cooler. 

In addition, you should check the user’s manual for more information. This will help you identify the various parts of the cooler and their respective locations. You should also take a moment to unplug the cooler. If you have a bottled cooler, you should empty the contents of the bottle before starting the cleaning process. After that, you should refill the bottle with clean water and run it through the dispenser. Once you have done this, you can replace the electrical outlet on the side of the water bottle. 

When cleaning a water cooler, you should never mix bleach and vinegar. Mixing them together can cause them to contaminate each other. Rather, you should opt for a bleach solution that is made up of a combination of liquid chlorine bleach and water. Another option is to simply use distilled white vinegar. 

Regardless of the type of water cooler you have, you should clean the interior as well as the exterior. This can be accomplished using a multipurpose spray and a scrub brush. Using a scrub brush will allow you to remove grime and stains on the cooler’s surfaces. Similarly, a microfiber cloth can be used to wipe down the surfaces. 

Before you begin cleaning, you will want to remove any debris from the cooler’s drip tray. This is a high-moisture surface and will require a gentle touch. A vacuum with a dusting attachment can be used to remove dust. Use a soft, non-abrasive sponge to gently remove any dirt or stains. 

You should also be sure to rinse the reservoir of your cooler. Rinsing is essential to keeping the water fresh. Ensure that you remove all the excess water, and then fill the reservoir with cold water. 

You should always remember to clean the cooler’s spigots as well. Spigots are high-touch surfaces that can easily become contaminated. For spigots that can be easily removed, you can rinse them with hot water and dishwashing detergent. Alternatively, you can pour the cleaning solution down the spigots and let it stand for two to five minutes. Afterward, you can rinse them with fresh tap water. 

After the cooler has been cleaned, you can run it again to ensure that everything is working correctly. To avoid damaging the cooler, you should not place it near other electronics.